Konica Minolta BIZHUB C203 - Manual (Page 48)

4 Installation using the Add Printer wizard
4-16 bizhub C203/C253/C353
4.2.3 Network connection (Web Service print)
In Windows Vista, Web Service print-supporting printers on the network can be located and installed.
2
Note
When the different kind of printer driver install after installing the printer driver, delete the installed
printer driver in advance.
For details, refer to "Uninstallation" on page 7-3.
TCP/IP setting for this machine
Specify the IP address in the TCP/IP Setting screen of this machine.
!
Detail
For details on specifying the IP address of this machine, refer to the User manual – Network
Administrator.
Web Service settings for this machine
To use the Web Service print, enable the print function in the Web Service Settings screen of this machine.
!
Detail
For details on the Web Service settings of this machine, refer to the User manual – Network
Administrator.
Printer installation from the Network window
2
Reminder
When installing on Windows Vista, administrator permissions are required.
1
Turn on the power of the machine while it is connected to the network.
– To allow printers to be detected during installation, the machine must be connected to the network.
2
To use the Web Service print, check that "Network discovery" is enabled in "Network and Sharing
Center" on the computer.
3
Insert the printer driver CD-ROM into the CD-ROM drive of the computer.
4
Click the [Start] button, and then click "Network".
The Network window appears, showing the computers and devices on the network.
5
Select the device name of this machine, and then click "Install" from the toolbar.
The selected Web Service print-supporting printer is found, and then the Found New Hardware Wizard
dialog box appears.
– If the User Account Control window appears, click the [Continue] button.
6
Follow the on-screen instructions.
– The steps performed in the New Hardware Wizard dialog box are the same as those described in
"Printer driver installation by specifying the IP address using the Add Printer Wizard". For details,
refer to Steps 11 through 20 of "Printer driver installation by specifying the IP address using the Add
Printer Wizard" on page 4-17.
– If the User Account Control window appears, click the [Continue] button.
– If the Verify the publisher dialog box of Windows Security appears, click "Install this driver software
anyway".