Konica Minolta BIZHUB C203 - Manual (Page 191)

bizhub C203/C253/C353 12-9
Settings on the control panel 12
12.2.4 Spool Print Jobs in HDD before RIP
You can specify whether or not a spool is used. (Default setting: ON)
- ON: When the next job is received while processing a job, the print data is stored in the HDD.
- OFF: The print data is not stored in the HDD.
2
Reminder
Do not change the setting to "OFF" for normal operation. Printing may fail.
!
Detail
For details on displaying the User Settings screen, refer to "Displaying the User Settings screen" on
page 12-3.
1
In the User Settings screen, touch [5 Printer Settings].
2
Touch [1 Basic Settings].
3
Touch [Spool Print Jobs in HDD before RIP].
4
Touch the button for the desired setting.