Konica Minolta BIZHUB C203 - Manual (Page 73)

bizhub C203/C253/C353 5-13
Installation on Macintosh computers 5
Specifying the TCP/IP setting for this machine (LPR settings)
% Specify the IP address of this machine.
!
Detail
For details on specifying the IP address of this machine, refer to the User manual – Network
Administrator.
LPD setting for this machine (LPR settings)
% To use LPR printing, enable LPD print in the LPD Setting screen of this machine.
!
Detail
For details on the LPD settings of this machine, refer to the User manual – Network Administrator.
Specifying the TCP/IP setting for the computer (LPR settings)
Specify the TCP/IP setting for the Macintosh computer connected to this machine.
1
On the "Apple" menu, select "Control Panel" - "TCP/IP".
2
From the "Connect via" drop-down list, select "Ethernet".
3
Select "Configure" items according to the settings for the network to which the Macintosh computer is
connected, and then specify the IP address and subnet mask.
4
Click the close button at the upper left corner of the dialog box.
– When the "Save changes to the current configuration?" message appears, click the [Save] button.
Adding a printer (LPR settings)
1
Select "HDD" - "Applications" - "Utility", and then double-click "Desktop Printer Utility" to open it.
The New Desktop Printer window appears.
2
From "Printer", select "LaserWriter".
3
From "Create Desktop", select "Printer (LPR)".
The Untitled window appears.
4
Click the [Change] button for "PostScript™ Printer Description (PPD) File".
A window for selecting a PostScript printer description (PPD) file appears.
5
Select the applicable PPD file, and then click the [Select] button.
The Untitled window appears again.
6
Click the [Change] button for "LPR Printer Selection".
A window for entering the IP address appears.
7
In "Printer Address", enter the IP address of this machine, and then click the [OK] button.
The Untitled window appears again.
8
Click the [Create] button.
A window for saving the setting appears.
9
Enter a desktop printer name, and then click the [Save] button.
An icon for the LPR printer is created on the desktop.