Konica Minolta BIZHUB C203 - Manual (Page 72)

5 Installation on Macintosh computers
5-12 bizhub C203/C253/C353
5.2 Mac OS 9.2
5.2.1 Installing the printer driver
After connected to a computer, this machine can be used as a printer by selecting a PostScript printer and
by specifying the printer description (PPD) file.
First, copy the printer description (PPD) file to the Macintosh computer.
1
Insert the printer driver CD-ROM into the CD-ROM drive of the computer.
2
Open the folder on the CD-ROM that contains the desired printer driver.
– Select the specified folder according to the printer driver to be used, the operating system, and the
language.
3
Select PPD file KONICAMINOLTAC353UVxxx.ppd, and then copy it into the Printer Descriptions folder
in "System Folder" - "Extensions" of "Hard Disk".
This completes the printer driver installation.
5.2.2 Selecting and connecting the printer
In OS 9, this machine can be connected with AppleTalk or LPR (LPD).
Specify the network settings for this machine, and then select the printer.
Specifying the AppleTalk settings for this machine
% Enable AppleTalk in "AppleTalk Setting", and then enter the printer name.
!
Detail
For details on the AppleTalk settings of this machine, refer to the User manual – Network Administrator.
Specifying the AppleTalk settings for the computer
Specify the AppleTalk settings for the Macintosh computer connected to this machine.
1
On the "Apple" menu, select "Control Panel" - "AppleTalk".
2
From the "Connect via" drop-down list, select "Ethernet".
3
Click the close button at the upper left corner of the dialog box.
– When the "Save changes to the current configuration?" message appears, click the [Save] button.
Selecting a printer (AppleTalk settings)
1
On the "Apple" menu, select "Chooser".
2
Make sure that "AppleTalk" is set to "Active", and then click the "LaserWriter" icon.
3
From the "Select a PostScript Printer" list, click the desired model name, and then click the [Create]
button.
A window for selecting a PostScript printer description (PPD) file appears.
4
Select the applicable PPD file, and then click the [Select] or [Open] button.
– If a different PPD file has already been selected, click the [Setup] button in step 3, and then click the
[Select PPD] button from the window that is already displayed.
A window for specifying options appears.
5
Select options installed on this machine on the "Options Installed 1" and "Options Installed 2" windows.
6
Click the [OK] button.
The "selector" window appears again.
7
Close the "selector" window.