Konica Minolta SU2 - Manual (Page 105)

Performing a Scan to HDD Operation 10
PageScope Light & Scanner Mode 10-7
10.4 Specifying the Scanning Options
10.4.1 [Quality&Reduction Screen]
Quality tab
Select the scanning resolution.
“Standard” (200
×
100 dpi), “Fine” (200
×
200 dpi), “Super Fine” (400
×
400
dpi), “Text+Photo” (400
×
400 dpi), “GSR” (200
×
200 dpi), “Super GSR”
(400
×
400 dpi), “600dpi Text” (600
×
600 dpi), “600dpi Photo” (600
×
600
dpi), or “600dpi Photo+Text” (600
×
600 dpi)
Contrast tab
Touch [Lighter], [Normal] or [Darker] to select the desired scanning
contrast.
✎
Note
If “600dpi Text” or “600dpi Photo+Text” was selected on the Quality
tab, the contrast can only be set to one of three levels: “Lighter”,
“Normal” and “Darker”. (The two “Lighter” settings and the two
“Darker” settings are each the same contrast level.)