Konica Minolta SU2 - Manual (Page 15)

Before Making Connections and Specifying Settings 1
Scanner Mode & Page Scope Light 1-9
1 Press the [Utility] key on the copier control panel.
2 Touch [Administrator Management].
3 Use the keypad to type in the administrator access code, and then
touch [Enter].
4 Touch [Admin. 2].
5 Touch [Network Set].
6 Touch [Basic Setting].
7 Specify the settings described above.
8 Touch [Enter].
✎
Note
In order to apply the new settings, the unit must be turned off, then on
again.