Konica Minolta SU2 - Manual (Page 12)

1 Before Making Connections and Specifying Settings
1-6 Scanner Mode & Page Scope Light
1.4 Enclosed Accessories
Network Scan Kit (SU-2)
● CD-ROM containing electronic manuals
Internet Fax & Network Scan Kit (SU-3)
● CD-ROM containing electronic manuals
● Utility Disk (CD-ROM)
✎
Tip
In order to use the scanning operations, the Network Interface Card
(NC-4) and the Network Scan Kit (SU-2) or the Internet Fax & Network
Scan Kit (SU-3) must be installed.
CAUTION
Only use the CD-ROM in a player that is CD-ROM-compatible.
➜ If a player not compatible with the CD-ROM format is used, your ears
or speakers may be damaged by the loud noise produced.
1.5 Preparing the LAN Cable and IP Address
In order to use the network application functions, a LAN cable and a
registered IP address are required.
The LAN cable is not included; it must be prepared by the user.
✎
Note
The LAN cable should be a cable for Fast Ethernet 100BASE-TX
(Category 5).