Konica Minolta SU2 - Manual (Page 25)

Network Settings 3
Scanner Mode & Page Scope Light 3-5
5 Touch [Network Set].
6 Specify the necessary settings
for the parameters in the
screen that appeared.
Refer to “List of Network
Settings” on page 3-1.
7 Continue touching [Enter] to
return to the Utility screen, and
then touch [Exit] to return to the
Basics screen.
✎
Note
After changing the setting of a parameter marked with
, the copier
must be turned off, then on again.
✎
Tip
The list of the settings specified for each function can be printed.