Konica Minolta SU2 - Manual (Page 14)

1 Before Making Connections and Specifying Settings
1-8 Scanner Mode & Page Scope Light
1.9 Specifying the IP Address
Be sure to specify the IP address of the copier before using the network
functions.
If network operations are performed before the IP address is specified,
malfunctions will occur.
Specify the IP address from the Basic Settings screen.
✎
Note
After changing the settings, turn the unit off, then on again.
Parameter Description
DHCP Specify whether to automatically retrieve the IP address from
the DHCP server or to specify a fixed IP address.
IP Address Type in the IP address of this unit.
*Type in the IP address only if the “DHCP” parameter is set to
“IP Input”.
Subnet Mask Type in the subnet mask of the connected network.
*Type in the subnet mask only if the “DHCP” parameter is set
to “IP Input”.
Gateway Type in the default gateway address of the connected network.
*Type in the default gateway address only if the “DHCP”
parameter is set to “IP Input”.