Konica Minolta SU2 - Manual (Page 57)

Performing a Scan to E-Mail Operation 7
PageScope Light & Scanner Mode 7-3
7 To change the file format or
coding method, touch [Scan
Mode], and then specify the
desired settings.
8 Specify the image quality,
density and zoom ratio
according to the document
to be scanned.
❍ Refer to “Specifying the
Scanning Options” on
page 7-18.
9 Press the [Start] key.
The transmission begins.
If the document is placed on the original glass:
● When scanning multiple document pages, continue scanning by
placing each consecutive page on the original glass, then pressing the
[Start] key.
● After all pages of the document to be sent are scanned, touch [Scan
End], and then press the [Start] key. The transmission begins.
If the transmission could not be completed
● The unit will automatically try again (auto redial) up to five more times
at one-minute intervals.
● The number of auto redials and the interval can be specified. For
details, refer to "Specifiying Transmission Settings" in the Advanced
Information on the CD.
● If the transmission could not be completed after auto redialing, a
transmission report is outputted.
Part of the first page of sent document is copied onto this report.
If it is not necessary to output the transmission report, change the