KORG Personal Multi-Effect Processor PX5D - Manual (Page 18)

18
Specifying the function of the Value encoder
You can specify the function that the Value encoder will
perform in Play mode. While in Play mode, hold down the
EXIT button
and press either the √ CURSOR or the ®
CURSOR to assign the following functions.
● Hold down the EXIT button and press the √ CUR-
SOR . The LCD will indicate “MASTER” for approxi-
mately one second. The Value encoder will adjust the
master level, and the π/† CURSOR will select pro-
grams. You can use the Value encoder to quickly ad-
just the master level. Each time the power is turned
on, this setting will be in recalled.
Adjust the
master level
Select
a program
● Hold down the EXIT button and press the ® CUR-
SOR . The LCD will indicate “PROGRAM” for ap-
proximately one second. The Value encoder will se-
lect programs, and the π/† CURSOR will adjust the
master level. You can use the Value encoder to quickly
select programs.
Select a
program
Adjust the
master level
Key Lock function
By activating the Key Lock function, you can disable all
operations except for selecting programs. This is a con-
venient way to prevent accidental operation during a live
performance.
● Hold down the EXIT button and press the TAP/BY-
PASS button . The LCD will indicate “KEYLOCK”
for approximately one second. The value encoder,
buttons, and knobs other than the π/† CURSOR,
PROGRAM MEMORY [A]–[D] buttons, and the foot
switches will not function.
Only program
selection is
possible
The Key Lock function will be cancelled when the
power is turned off. You can also cancel the Key Lock
function by performing “Specifying the function of
the Value encoder.”