KORG Personal Multi-Effect Processor PX5D - Manual (Page 32)

32
Utility mode
Here you can make settings such as LCD Backlight, Key
Transpose, and Bass Cancel. From Play mode, press the
UTILITY button
; the Utility icon will appear, and you’ll
be in Utility mode.
Select a utility function
Each time you press the UTILITY button, you’ll step through
the utility function screens in the order shown below.
Change settings for each utility function
Change the desired settings for each utility function.
Press the EXIT button to return to Play mode.
These settings are preserved even if you turn off the power.
BACKLIGHT: LCD backlight on/off
Use the Value encoder to turn the backlight on/off.
Backlit
On/Off
If you are using batteries, the operating time will be short-
er if the backlight is on.
KEY-TRN: Key transpose
Displaying this screen transposes the key of the audio in-
put from the USB connector or AUX jack. Use the Value
encoder
to specify the amount of key transposition. The
key can be transposed in a range of +/-1 octave. The val-
ue can be adjusted up and down for 3 semitones in 10
cent steps, and in semitone steps (100 cents) for the re-
mainder of the range.
Transpose
value
Display of 100 cent units
Display of 10 cent units
The output signal for key transpose will be mono.