KORG Personal Multi-Effect Processor PX5D - Manual (Page 22)

22
Chain select (CHAIN 01–20)
Here you can select one of the twenty chains.
In this screen, you can press the ENTER/REC button to
enter the Chain Edit screen (
☞p.22 “Chain edit”).
The edited settings will return to the settings of the orig-
inal program if you switch chains or turn off the power
without Writing.
Tempo
Use the Value encoder or TAP/BYPASS button to set the
tempo (
☞p.20 “Tempo”).
Level
Use the Value encoder to set the level of Rhythm & Bass
sound (
☞p.21 “Level”).
Reverb
Use the Value encoder to set the amount of Reverb for
the Rhythm & Bass (
☞p.21 “Reverb”).
Write
This saves the chain. Use the Value encoder to select the
save-destination (chain number) and press the ENTER/REC
button
. The PX5D can store twenty chains.
Chain number
Chain edit
Here you can specify the pattern that will be used for each
step. In the chain select (CHAIN01–20) screen, press the
ENTER/REC button
to enter the Chain Edit screen. Use the
√ /® CURSOR to select each step, use the π/† CURSOR
to select a parameter, and use the value encoder and EN-
TER/REC button
to specify the value. After you’ve speci-
fied the pattern for each step of the chain, press the EXIT
button
to return to the Chain Select screen.
Bass key Bass key Bass key
Rhythm pattern Rhythm pattern Rhythm pattern
Repeat Repeat Repeat
Step01 Step02 Step16
The edited settings will return to the settings of the orig-
inal program if you switch chains or turn off the power
without Writing.