Konica Minolta bizhub 360 - Manual (Page 10)

8
To Access the MFP
1. Touch Input
2. Enter the password (“ x ”)
3. Touch OK
4. Touch the Access hard key
Built-in Stamp and Set Numbering Stamp Size
APPLICATION:
The stamp size of built-in stamps and Set Numbering can now be change. This enhances
the versatility of the existing functionality of built-in stamp and Set Numbering.
In this exercise; 1st produce an output sample of the standard Built-in Stamp and
Set Numbering Stamp size. Then utilize the following procedure for changing the size
of the Built-in Stamp and Set Numbering Stamp and compare the out put with
the standard functionality.
1. Touch Application
2. Touch Stamp/Overlay
3. Touch Built-in-Stamp
4. Touch Change Size , OK
5. Touch Set Numbering
6. Touch Change Size , OK , Start
bizhub 500/420/360 Copy Job Shops