Konica Minolta bizhub 360 - Manual (Page 3)

1
bizhub 500/420/360 Copy Job Shops
Finding the Copier IP Address on the bizhub 500/420/360
It will be necessary to have access to the copier IP address when either configuring
the 500/420/360 onto a network or setting up a “one touch”.
1. Press Utility/Counter on control panel.
2. Administrator Setting
3. Enter administrator password: 12345678 , OK
4. Network Setting
5. TCP/IP setting
The copier IP address will appear on the control panel display.
Create an 8.5" x 14" Set
Stapled on left hand corner
Place two 8.5" x 14" originals face up; feet 1st into the RADF
1. Finishing
2. Corner , OK
3. Combine Originals & Original Direction
4. Index the last original graphic on right side of display panel , OK
5. Press start key
Create an 8.5" x 11"– 1:2 Set
Stapled on left corner & reduced by 78.5%
Place eight 8.5" x 11", 1:1 originals face up in the RADF.
1. Simplex/Duplex
2. 1:2 , OK
3. Finishing
4. Corner , OK
5. Zoom , Reduce/0.785 , OK
6. Press start key