Krell Industries S-1000 - Manual (Page 38)

34 Krell S–1000
After the selections for analog audio inputs are entered, press the
previous key. The
ASSIGN AUDIO INPUTS screen appears. Select DIGITAL.
The ASSIGN DIGITAL AUDIO INPUT screen appears.
Use the direction and enter keys to scroll through and select the dig-
ital device you want to configure, select the digital input, and choose
the default mode for the four major surround sound digital formats:
DOLBY DIGITAL 2.0, DOLBY DIGITAL 5.1, DTS 5.1, and PCM. You can choose a
decoding preference for each of these signals under YOUR DECODE
PREFERENCE IS. For more information, see Decoding Modes for the
S–1000, on page 60.
The digital input must be set to DISABLED to use the analog input.and it must
be set to DISABLED to use preamp mode.
PREVIOUS holds the last selected digital input.
The DOLBY DIGITAL EX, DTS-ES DISCRETE 6.1, and DTS-EX MATRIX 6.1 operating
modes are available only when your system has 6 or 7 channels.
When the device is configured, press the previous key (30) to return
to the
ASSIGN AUDIO INPUTS menu.
System Configuration, continued
Step 2, Configure Devices
Assign Digital Audio
Inputs
Notes
Assign Digital Audio
Input Screen
Assign Analog Audio Inputs,
continued
AUTO-MIGRATION ON
allows the S–1000 to switch to the analog input
automatically, if no digital input is present. This function is particular-
ly useful for SACD players.
The analog signal must be assigned, not
DISABLED
, in order for auto-
migration to be active.
Prev