Krell Industries S-1000 - Manual (Page 45)

Krell S–1000 41
System Configuration, continued
Step 3, Configure Level Adjustment
An analog device must be selected in order for the analog input trim
option to function. The following screen appears if an analog device
is not selected:
To select an analog device, first exit the menu program by pressing
the menu key (29). Then press the analog device key [for example,
the tape key (14 )] on the remote control. The front panel displays
the device selection. Enter the menu program and follow the proce-
dure for selecting analog input trim described on the next page.
IMPORTANT:
PLEASE READ BEFORE
CONFIGURING ANALOG
INPUT TRIM