Krell Industries S-1000 - Manual (Page 60)

56 Krell S–1000
System Configuration, continued
Step 4, Operation
Room EQ Setup
continued
Note
TYPE
Navigate to TYPE, and configure one, two, or all of the three bands
(I, II, III) for FREQ, SHAPE, and LEVEL.
It is not necessary to configure all three filters, you may configure only one
or two filters.
Not all parameters are adjustable for all filter types.
APPLY
Select
APPLY
and set the selection, if you want to hear your configu-
ration. The Room EQ Setup configurations you have just selected
audible if you have a source device playing.
After selecting the appropriate loudspeaker configuration for your
system, press the previous key (30) twice to return to the main con-
figuration menu.
Exit the main configuration menu by pressing the menu key (29) on
the remote. The S–1000 is now in the operational mode.
HOW TO NAVIGATE
IN THE MENU MODE
1 Press the menu key (29) to enter and
exit the menu mode from the
operational mode.
2 Press the direction keys (33) to scroll
from line to line, and to scroll through
options within a line.
3 Press the enter key (32) to select and
set an option.
4 Use the directional keys to scroll to
the next line.
5 Press the prev key (30) to return to the
previous screen.
6 Press the pre key (1) to exit the menu
mode and place the S–1000 in the
stand-by mode.
Prev Prev
Menu