Lexmark X6100 - Manual (Page 10)

6
Press: To:
Power Turn your All-In-One on or off.
Note: To enter the state of lowest power consumption,
press and hold the Power button for at least five
seconds.
Stop/Clear • Cancel a scan, print, or copy job in progress.
• Clear a fax number or end a fax transmission and
return the display to the fax default.
• Exit a menu.
• Clear current settings and return to default settings.
Copy Enter copy mode.
Note: This button is lit when the All-In-One is in copy
mode.
Scan Enter scan mode (possible when the All-In-One is
attached to a computer).
Note: This button is lit when the All-In-One is in scan
mode.
Fax Enter fax mode. The All-In-One can receive a fax while in
any mode.
Note: This button is lit when the All-In-One is in fax
mode.
Quality • Select from the following copy qualities: Quick,
Normal, Better, or Best.
• Select a fax resolution: Standard, Fine, Superfine, or
Ultrafine.
• Select a scan resolution when the All-In-One is
attached to a computer.
Number of Copies Specify a number (1-99) of copies.
Lighter/Darker Lighten or darken a copy or fax.
Reduce/Enlarge Customize the size of your original document by a
percentage, Fit to Page, or to poster size.
Left arrow • Decrease a number on the display.
• Scroll through a list on the display.
Select Choose the option that appears on the display.