86 error messages and flashing lights – Lexmark X6100 User Manual

Page 90

Advertising
background image

86

Error messages and flashing lights

Use this section to understand All-In-One software error messages on your
computer screen or control panel display and blinking lights on your
All-In-One.

Ink Low message

A print cartridge is running out of ink. The Ink Low warning occurs when
your cartridges are about 25% full, 15% full, and 5% full. When one of
these messages appears, you can:

Click OK.

Click the ? to get information about ordering supplies.

Order a new cartridge or locate a dealer near you from the Lexmark
Web site at www.lexmark.com.

For help installing a new cartridge, see page 64.

Paper Jam message

If your All-In-One has a paper jam:

1

Click Start

Programs

Lexmark X6100

Series

Lexmark X6100 Series Solution Center.

2

Click the Troubleshooting tab on the left side of the screen.

3

Click How to clear and avoid paper jams.

4

Follow the instructions to clear the paper jam.

Paper Out message

If your All-In-One is out of paper,

Load paper then press Select

appears on the display.

1

Follow these instructions to clear the message from the display.

2

Print your document.

Note: If your All-In-One has a paper jam, see page 86 for help.

Advertising