Lexmark X6100 User Manual
Page 84
80
Print is too dark or smudged
•
Let the ink dry before handling the paper.
•
Select the correct paper type and size in Properties, Preferences, or
from the All-In-One Center.
•
Make sure the paper is straight and unwrinkled.
•
Select the appropriate Quality for the paper type. If you are printing
on inkjet paper, select Quick Copy from the Quality/Copies tab of
Properties, Preferences, or from the All-In-One Center.
•
Clean the cartridge nozzles. For help, see page 69.
Printed pages have alternating bands of light and dark print
(intermittent printing)
If your document has alternating bands of light and dark print, you might
need to select the highest print quality.
1
With your document open, click File
Print.
2
In the Print dialog box, click Properties, Preferences, Options, or
Setup (depending on your program or operating system).
3
Select Best on the Quality/Copies tab.
Print quality is poor at the edges of the page
Like other All-In-Ones, the Lexmark X6100 Series cannot print in the
extreme left, right, top, or bottom edges of a page. Use these minimum
settings:
•
Left and right margins:
–
6.35 mm (0.25 inches) for all paper sizes except A4
–
3.37 mm (0.133 inches) for A4 size paper
•
Top margin:
1.7 mm (0.067 inches)
•
Bottom margin:
16.51 mm (0.65 inches)