Table 3-1. current configuration – Lantronix UDS2100 User Manual
Page 18
3: Getting Started
UDS2100 User Guide
18
Table 3-1. Current Configuration
Setting
Description
Name
Configurable field. A name that identifies the UDS2100.
Double-click the field, type in the value, and press Enter
to complete. This name is not visible on other PCs or
laptops using DeviceInstaller.
Group Configurable
field.
A
group name to categorize the
UDS2100. Double-click the field, type in the value, and
press Enter to complete. This group name is not visible
on other PCs or laptops using DeviceInstaller.
Comments
Configurable field. Information about the UDS2100.
Double-click the field, type in the value, and press Enter
to complete. This description or comment is not visible
on other PCs or laptops using DeviceInstaller.
Device Family
Displays the UDS2100’s device family type as UDS.
Type
Displays the device type as UDS2100.
ID
Displays the UDS2100’s ID embedded within the box.
Hardware Address
Displays the UDS2100’s hardware (or MAC) address.
Firmware Version
Displays the firmware currently installed on the UDS2100.
Extended Firmware
Version
Displays the full version nomenclature of the firmware.
Online Status
Displays the UDS2100’s status as online, offline,
unreachable (the UDS2100 is on a different subnet), or
busy (the UDS2100 is currently performing a task).
Telnet Enabled
Permits Telnet sessions.
Telnet Port
Displays the UDS2100’s port for Telnet sessions.
Web Enabled
Permits configuration through Web Manager.
Web Port
Displays the UDS2100’s port for Web Manager
configuration.
Maximum Baud Rate
Supported
Displays the UDS2100’s maximum baud rate.
Note:
The UDS2100 may not be running at this rate
currently.
Firmware Upgradeable
Displays True, indicating the UDS2100’s firmware is
upgradeable as newer versions become available.
IP Address
Displays the UDS2100’s current IP address. To change
the IP address, see
Number of COB
partitions supported
Displays the number of COB partitions supported.
Supports Dynamic IP
Indicates whether the current IP address on the UDS2100
was set manually or assigned by DHCP.
Subnet Mask
Displays the UDS2100’s current subnet mask. To change
the subnet mask, see
on page