Lantronix UDS2100 - Manual (Page 7)

UDS2100 User Guide 7
1 1 : : U U s s i i n n g g T T h h i i s s G G u u i i d d e e
Purpose and Audience
This guide provides the information needed to configure, use, and update the
UDS2100 device server. It is for system administrators and those responsible for
installing and maintaining the UDS.
Chapter Summary
Table 1-1. Chapter Summary
The remaining chapters in this guide
Chapter Description
2: Introduction Describes the main features of the UDS and the protocols
it supports.
3: Getting Started Provides information for installing your unit and getting it
up and running using DeviceInstaller or a serial port
connection.
4: Configuration Using Web
Manager Details using the Web Manager to set parameters such as
port and server properties.
5: Configuration via Telnet or
Serial Port (Setup Mode) Provides instructions for accessing Setup Mode
(command line interface) using a Telnet connection
through the network or a terminal or terminal emulation
program through the serial port.
6: Setup Mode: Server
Configuration Details the network (server) settings.
7: Setup Mode: Channel
Configuration Details the serial port settings.
8: Setup Mode: Advanced
Settings Details expert and security settings and explains how to
reset the unit to factory default values.
9: Firmware Upgrades Provides instructions for obtaining the latest firmware and
updating the UDS.
10: Monitor Mode Provides instructions for accessing and using the
command line interface to monitor the network and
diagnose problems.
11: Troubleshooting and
Contact Information Describes common problems and error messages and how
to contact Lantronix Technical Support.
12: Connections and Pinouts Provides descriptions and illustrations of connection
hardware.