LightSpeed Technologies 800iX - Manual (Page 18)

8 0 0 i X U s e r M a n u a l
14 | 800iX User Manual
1. Ensure the power switch is in the “OFF” position and all front panel volume controls
are turned fully counter-clockwise.
2. Locate the 1/4”– 1/4” mono cable.
3. Connect the cable from the 1/4” audio output jack on the 800iX to the input
jack on the 880iR, 850iR, or an existing amplifier.
4. CONNECTION TO THE AMPLIFIER
2.06/2.54
AUDIO OUTPUT
DC POWER
16V/1A
CHARGE LEVEL
MIC LINE
CHANNEL A CHANNEL B SENSOR INPUTS
SHORT
BALANCED
AUDIO
OUTPUTS + —
850iR Receiver/
Amplifier
880iR Receiver/
Amplifier
Existing
Amplifier
800iX Receiver