Rear panel controls – LightSpeed Technologies 800iX User Manual
Page 8
8 0 0 i X U s e r M a n u a l
800iX User Manual | 4
REAR PANEL CONTROLS
1. DC POWER:
Plug the 24 V power
supply into this jack.
2.
CHARGERS:
These jacks can be used
to charge the optional LightMic or
handheld mic as an alternative to
connecting them to the REDMIKE
cradle charger.
3.
AUDIO OUTPUT:
This 1/4” unbalanced
audio output jack may be connected
to a “line in” jack on a mixer/amplifier.
This output is a mixed audio of
channels A and B.
4.
LEVEL (MIC/LINE):
Changes the audio
level output from the audio
output jack to “mic” or “line” level.
5.
BALANCED AUDIO OUTPUTS:
Two
independent audio outputs that may
be connected to a balanced
microphone input jack on the mixer/
amplifier using a standard XLR
microphone cable.
6.
SENSOR INPUT:
The IR sensor cable
connects to the sensor input.
Connect additional sensors to the
800iX to cover large or odd-shaped
classrooms.
7.
SENSOR SHORT:
This LED glows
when there is a short in one of the
sensor cables.
2.06/2.54
AUDIO OUTPUT
DC POWER
16V/1A
CHARGE
LEVEL
MIC LINE
CHANNEL A
CHANNEL B
SENSOR INPUTS
SHORT
BALANCED
AUDIO
OUTPUTS
+
—
1
2
3
4
5
6
7