LightSpeed Technologies 800iX - Manual (Page 7)

8 0 0 i X U s e r M a n u a l
3 | 800iX User Manual
FRONT PANEL CONTROLS
1. POWER Switch/POWER Indicator:
This switch is used to turn the
800iX ON (switch up), or OFF
(switch down). When the POWER
switch is in the ON position, the
POWER light will glow red.
2. IR Indicators (IR): These
lights will glow red when the
corresponding microphone is
turned on. This light confirms
the 800iX is receiving a steady
infrared signal.
2
3. AF Indicators (AF): These lights
flash green when audio (voice)
from the microphone is detected.
4. A VOLUME: Controls the volume
level of the teacher microphone
that is switched to Channel A.
Rotating the knob clockwise
increases output level.
5. B VOLUME: Controls the volume
level of the optional second
microphone that is switched to
Channel B. Rotating the knob
clockwise increases output level.
2
1
3
4 5