Finalizing connections, Final check, Ensure sensor cable is attached securely – LightSpeed Technologies 800iX User Manual
Page 20
8 0 0 i X U s e r M a n u a l
800iX User Manual | 16
1. Ensure all cables are appropriately routed out of walking paths and work areas to
prevent safety hazards to individuals in the room.
2. The amplifier packing material should be kept for warranty shipping purposes.
3. Proceed to initial set-up to test system performance.
Leave microphones charging so they are ready for use.
Microphones will need to be charged on a daily basis.
FINAL CHECK
6. FINALIZING CONNECTIONS
4. Ensure the power switch is in the “OFF” position and all front panel volume
controls are turned fully counter-clockwise.
6. Connect DC end of power supply
to the black power jack labeled
“DC POWER.”
7. Connect the black AC power cable
from the power supply to a wall outlet.
2.06/2.54
AUDIO OUTPUT
DC POWER
16V/1A
CHARGE
LEVEL
MIC LINE
CHANNEL A
CHANNEL B
SENSOR INPUTS
SHORT
BALANCED
AUDIO
OUTPUTS
+
—
5. Ensure sensor cable is attached securely.
2.06/2.54
AUDIO OUTPUT
DC POWER
16V/1A
CHARGE
LEVEL
MIC LINE
CHANNEL A
CHANNEL B
SENSOR INPUTS
SHORT
BALANCED
AUDIO
OUTPUTS
+
—