Liebert 1500 - Manual (Page 21)

Specifications 15
Figure 14 Front view of the (4) 70-250 A circuit breaker panel
The DC output connections can accommodate two 4/0 cables back to back for each circuit breaker.
The required lugs can be either for two 3/8” holes at 1” c-c or for two 1/2” holes at 1-3/4” c-c.
Refer to Table 21 for the maximum panel capacity.
The (4) 70-250 A circuit breaker panel can accept up to:
• four breakers (70 to 225 A) mid trip with or without the metering shunt option (1 pole breakers)
• two breakers (70 to 225 A) mid trip with the relay trip option (takes a 2 pole space)
• two breakers (250 A) mid trip with or without the metering shunt option (takes a two pole
breaker)
• one (250 A) breaker mid trip with the relay trip option (takes a 3 pole space)
Table 18 Circuit breaker sizes available for the (4) 70-250 A circuit breaker panel
Nominal current CPC
70 A (no shunt) A0617079
70 A (with shunt) A0617080
70 A (with relay trip) A0617081
100 A (no shunt) A0616667
100 A (with shunt) A0616668
100 A (with relay trip) A0616669
150 A (no shunt) A0616670
150 A (with shunt) A0616671
150 A (with relay trip) A0616672
200 A (no shunt) A0616673
200 A (with shunt) A0616674
200 A (with relay trip) A0616675
225 A (no shunt) A0605489
225 A (with shunt) A0605490
225 A (with relay trip) A0605492
250 A (no shunt) A0616676
250 A (with shunt) A0616677
250 A (with relay trip) A0616678
900A MAX. PANEL CAPACITY
1
2
3
4
CIRCUIT BREAKER PANEL
NT6C12EE
FA
REL ( ) SER NO ( )
UNIT
AMPS
LOAD
225 225 225 225
1 2 3 4
(4) 70-250 A