2 helios rectifiers 200i/48 and 200e/48, Helios rectifiers 200i/48 and 200e/48, Table 25 – Liebert 1500 User Manual

Page 28: Table 26

Advertising
background image

22 Specifications

Electrical specifications of the Helios Rectifier 100/48

The electrical specifications of the Helios Rectifier 100/48 are listed in Table 25.

3.7.2

Helios Rectifiers 200I/48 and 200E/48

Mechanical specifications of the Helios Rectifiers 200I/48 and 200E/48

The mechanical specifications of the Helios Rectifier 200I/48 and 200E/48 are listed in Table 26.

Table 25

Electrical specifications of the Helios Rectifier 100/48

Parameter

Specification

Input voltage:

208/240 V AC, 1-phase, 47-63 Hz
Input voltage range: 176 to 264 V AC

Input current:

31 A nominal at 208 V AC input and -56 V DC, 100 A output

Recommended AC
service input:

50 A, two pole AC circuit breaker

Output voltage:

Float: -48 to -58 V DC
Equalize: 0 to 4 V DC above Float
Maximum: -59.5 V DC

Output current:

100 A per rectifier
100 A for a one position shelf
300 A for a three position shelf

Input protection:

A two pole / 45 A circuit breaker opens both lines.

Output protection:

The rectifier is protected by a 120 A circuit breaker at the output. The output current
is limited to a value adjustable from 50% to 105% of the rated capacity of the
rectifier. This circuit is factory set to 105 A.

Output regulation:

The rectifier output voltage is automatically regulated to remain within ±0.5% of the
selected value under all load conditions and within the specified input voltage,
frequency, and ambient temperature ranges. And within + 1% for any combinations
of specified input, output and environmental conditions.

Efficiency:

Efficiency is better than 88% at a nominal input voltage of 208/240 V AC and an
output load greater than 40 A.

Power factor:

Power factor is 0.99 at a nominal input voltage of 208 V AC and output loads greater
than 40 A.

Electromagnetic
interference (EMI):

The rectifier meets the FCC requirements for conducted and radiated EMI for Class
“A” equipment.

Heat dissipation:

763 W (2606 Btu/hr)

Table 26

Mechanical specifications of the Helios Rectifiers 200I/48 and 200E/48

Figure

Height

Depth

Width

Weight

Figure 22

254 mm

(10 in.)

559 mm

(22 in.)

521 mm

(20.5 in.)

42.3 kg

(93 lb)

Advertising
This manual is related to the following products: