Link electronic DigiFlex 1152 - Manual

1000 SERIES DIGIFLEX
Mounting Frame Options
1000 - Single Power Supply, Holds 11 Modules
1000/2 - Dual Power Supply, Holds 10 Modules
7200 - Mounting Frame, Holds 1 Module
MADE IN THE USA
LINK ELECTRONICS, INC.
ANALOG VIDEO DISTRIBUTION AMPLIFIER 1 X 8
DigiFlex 1152
FEATURES
‹ Eight Outputs
‹ Differential Input
‹ DC or AC Coupled
‹ Op Amp. Technology
‹ ±3dB Gain, each set of four
‹ 100 MHZ Bandwidth
‹ Diff. Gain and Phase 0.1
The DigiFlex 1152 Video DA represents the state
of the art in analog video distribution. The 1152
provides high-performance video distribution in the
LINK DigiFlex 1000 Frame. The advantage is
obvious: both analog and digital distribution
amplifiers can operate side-by-side in a single
frame!
Utilizing the latest CMF Op-Amp technology, the
1152 combines wide bandwidth, low noise, and
low power consumption. The video path is truly
transparent, with differential phase and gain errors
of <0.1°
and <0.1%, respectively. Video signal-to-
noise ratio exceeds 65dB.
DC-coupled differential input is a standard feature,
providing high common-mode rejection. Eight
outputs are available on the companion rear cell,
model 1011. The front panel gain control adjusts
the level to ±3dB.
The attention to detail in the design of the 1152
extends to the power supply, which features a
simple switching regulator. While slightly more
complex than a linear supply, this offers the
highest possible efficiency. Backed by a ten-year
warranty including parts and labor. The 1152 will
provide years of trouble-free service.
LINK
ELECTRONICS, INC. ‹ 2137 Rust Avenue ‹ Cape Girardeau, MO 63703-7668
Phone 573 334 4433 ‹ FAX 573 334 9255