Link electronic Analog Pulse Distribution Amplifier DigiFlex 1143 - Manual

1000 SERIES DIGIFLEX
Mounting Frame Options
1000 - Single Power Supply, Holds 11 Modules
1000/2 - Dual Power Supply, Holds 10 Modules
7200 - Mounting Frame, Holds 1 Module
MADE IN THE USA
LINK ELECTRONICS, INC.
ANALOG PULSE DISTRIBUTION AMPLIFIER 1 X 8
DigiFlex 1143
FEATURES
‹ Pulse DA
‹ Regenerative
‹ Eight Outputs
‹ Fixed Level Output, 4Vp-p
‹ Two to Eight Vp-p Input
‹ Slice at 50% Point
The DigiFlex 1143 is a regenerative pulse
distribution amplifier designed to operate in the
DigiFlex 1000 or 7200 frame. Its input is
connected through a companion rear cell, Model
1011. The input pulse is re-sliced at the 50% point
by a level-tracking comparator circuit. Regardless
of the input level, it always slices at the 50% point.
The output width is constant, based on the input
signal at the 50% point. Overshoot and ringing are
eliminated due to this process. Discrete linear amplifiers are used in the output
drivers to insure that pulse shape and rise/fall
times are accurately set by LC filter circuits. The
outputs are therefore fixed at 4.0Vpp with 140ns
rise/fall times and pulse width equal to the input
width at the 50% point. No internal adjustment or
calibration is required. A jumper is incorporated to
select between high impedance or 75
Ω termination
of the input signal.
Backed by Link’s 10-year warranty, the DigiFlex 1143 is ready to provide years of error-free operation.
LINK
ELECTRONICS, INC. ‹ 2137 Rust Avenue ‹ Cape Girardeau, MO 63703-7668
Phone 573 334 4433 ‹ FAX 573 334 9255