Link electronic 200 Series Mounting Frame Audio and Video DA's PFM-210 - Manual

VideoLink Model PFM-210
200 SERIES
AudioLink Model PFM-220
MADE IN THE USA
LINK ELECTRONICS, INC.
200 SERIES MOUNTING FRAME
AUDIO AND VIDEO DA's
MODEL PFM-210 / PFM-220
FEATURES
‹ Holds 4 Modules
‹ Plug-in Power Supply
‹ Low Power Consumption
The 200 series frames are available in two
versions. The video frame, model PFM-210, will
accommodate up to four (4) PVA-152/1 video
DA's. Each PVA-152/1 has eight (8) video outputs
when operating in the PFM-210 frame. Model
PFM-220 will accommodate up to four (4) PAA-
652/1 audio DA's with (8) low impedance audio
outputs . The 200 series comes complete with
mounting frame, power supply and rear panel
connectors for easy hook-up. The video DA input
can be looped for up to 32 outputs with the frame
loaded with four modules.
The audio DA input in the PFM-220 frame can be
looped for up to 32 mono outputs with the frame
loaded with four modules. By using two modules
for right signal and two modules for left, the PFM-
will provide sixteen stereo outputs.
‹ Plug-in DA's
‹ Eight Outputs
‹ One Rack Unit
The PFM-210 rear panel connectors are BNC
and the PFM-220 are captive screw clamp
terminals.
The power supply PC board is designed as the
basis for both the PFM-210 video and PFM-220
audio frame. The PC board is designed to accept
either the video or audio power transformer. The
rear panel motherboard correctly routes the input
and output signals and provides for future
expansion.
The 200 series is ultra stable and extremely
reliable for all applications. A ten year warranty
covers all Link products including parts and labor.
LINK
ELECTRONICS, INC. ‹ 2137 Rust Avenue ‹ Cape Girardeau, MO 63703-7668
Phone 573 334 4433 ‹ FAX 573 334 9255