Link electronic DigiFlex 1132 User Manual
1000 SERIES DIGIFLEX
Mounting Frame Options
1000 - Single Power Supply, Holds 11 Modules
1000/2 - Dual Power Supply, Holds 10 Modules
7200 - Mounting Frame, Holds 1 Module
MADE IN THE USA
LINK ELECTRONICS, INC.
HD/SD-SDI DIGITAL DISTRIBUTION AMPLIFIER
Composite & Component SDI
SMPTE 259M, 344M, 292M compliant
Serial Digital Input
Eight or Four Serial Outputs
Automatic Equalization and Re-clocking
The LINK 1132 DigiFlex serial distribution amplifier
restores the incoming signal to its proper
amplitude. The signal is reshaped with automatic
equalization, and DC restoration. The 1132 ‘s
maximum equalized length for cable for SD is
300m at 270Mb/s, and for HD, 100m at 1.485Gb/s.
Eight outputs are provided on a removable rear cell
1033, and four outputs are provided on the 1032
rear cell. An LED at the front edge of the front
module, and one on the rear module indicate a
Loss of Signal.
A rear I/O module must be selected for the specific
front signal module. The signal module and rear
I/O module with the flexibility of the frame place
virtually no limits on the versatility of the DigiFlex
The input signal can be 143Mb/s, 177Mb/s,
2 7 0 M b / s , 3 6 0 M b / s , 5 4 0 M b / s , a n d
1.4835/1.485Gb/s standards. The front module has
LED's that tell if the input signal has locked, and
the data rate that it is locked.
The 1000 series DigiFlex modules are compact
designs that allow eleven modules to mount in the
1000 frame and ten modules with a redundant
power supply. Any 1000 series module will operate
in the 1000 frame in any configuration, audio or
video, digital/analog, generators or test modules.
Backed by Link's 10-year warranty, the 1132 will
provide years of outstanding performance.
2137 Rust Avenue
Cape Girardeau, MO 63703-7668
Phone 573 334 4433
FAX 573 334 9255