Link electronic IEC-740 User Manual

Link, Model iec-740

Advertising
background image

700 SERIES

MADE IN THE USA

LINK ELECTRONICS, INC.

AUDIO DISTRIBUTION AMPLIFIER

MODEL IEC-740

FEATURES

‹

1 input, 8 outputs

‹

Select Dual 1 X 4

‹

Balanced Input

‹

Stereo Operation

The Link IEC-740 audio distribution amplifier
reflects the latest in the state of the art in
engineering techniques. The IEC-740 is an
extremely versatile audio amplifier, offering
outstanding performance. The input is high
impedance bridging. All inputs and outputs use
multi level screw clamp terminals located on the
rear panel. The IEC-740 can be configured for
balanced or un-balance operation.

The versatility of the IEC-740 is illustrated by its
choice of operation, mono or stereo. The IEC-740
is a rugged device, intended for all applications
where performance and reliability are required.

‹

Mount 3 in 1RU Frame

‹

Low Power Consumption

‹

Portable

‹

Ten Year Warranty

A switch on the front panel allows the unit to
operate as a mono DA with one input and eight
outputs. Selecting the dual 2 X 4 mode is required
for stereo operation with four outputs for each of
the Left and Right channels. A gain trim control for
each channel allows for independent level
matching to approximately 16dB.

The IEC-740 is a self contained audio DA with an
on board power supply that draws only 4 watts. A
fuse accessible from the front panel provides easy
replacement. Up to three units can be mounted in
a 1 RU mounting tray model PRT-700. All products
carry a ten-year warranty including parts and labor.

LINK

ELECTRONICS, INC.

‹

2137 Rust Avenue

‹

Cape Girardeau, MO 63703-7668

Phone 573 334 4433

‹

FAX 573 334 9255

Advertising
This manual is related to the following products: