‘hotkeys’ and they signal to the MC5 that you wish to control it, rather
than the computer. However, if these particular hotkeys clash with another
device or program, then your administrator may change them to a different
combination. If the

combination fails to work, then please contact

the system administrator for details.

2 While still holding

and

, press the first numeral of the required port

address, then:

• If the port address is a single character, release all of the keys.
• If the port address is two or more characters, release the first numeral

key and press the second – repeat this procedure until all of the port
address numerals have been entered, then release

and

Note: The numbers on your keyboard’s numeric keypad are not valid, use
only the numeral keys above the QWERTY section.
Note: If your user port does not have authorisation to view the selected port
then an ‘Insufficient user rights’ messages will be displayed.

Standard hotkeys
The range of hotkey combinations are as follows:
Note: If your hotkeys have been changed, substitute them for

and

the examples given here.

Selects port 1

Selects port 2

•

then

Selects port 10

•

then

Selects port 24

Note: When entering multiple digit addresses as
above or for even longer cascaded computers,
keep

and

pressed down until all other

numbers have been entered.

Selects the next available port

Selects autoscan mode where each (authorised)
port is displayed for a period determined by
the administrator. To cancel autoscan mode,
simply select any fixed channel using any of the
suggested methods.

Switches off the video signal – this will cause
a power saving monitor to enter its standby
mode. To awaken the monitor, simply select
any fixed channel using any of the suggested
methods.

Logs out the current user (if security is enabled)
or selects port 0 to disable the video signal (if
security is disabled).

& , , or

Moves the currently displayed on-screen menu
around the screen.

Advertising

Popular Brands

Popular manuals