Clearing ip access control – Lindy MC5-IP User Manual
Page 79
78
Clearing IP access control
This option removes all entries from the IP access control feature within the
MC5-IP.
What is IP access control?
The IP access control feature (configurable by a remote admin user) allows
certain network address ranges to be denied access to the MC5-IP. If set
incorrectly, it is possible to exclude all network users and so this option provides
an emergency recovery point.
To clear IP access control
1 From a local or remote (not
accessible from a global keyboard),
log on as the ‘admin’ user.
2 Press
(hotkeys can
change).
3 Press to select ‘More menus’.
4 Select ‘Functions’.
5 Select ‘Configure IP port’.
6 Highlight the ‘Clear IP access
control’ option and press
.
LINDY MC5
Network Config
Mac Addr
00:0F:58:40:07:FE
Use DHCP
No
IP Address
192.168.42.25
Net Mask
255.255.255.0
Gateway
192.168.0.1
VNC Port
5900
HTTP Port
80
Clear IP Access Control
Enter-Select
-Up
-Down
Esc-Exit
Space-Toggle