Configure ip port, Unit configuration, For details – Lindy MC5-IP User Manual

Page 76: Standard configuration menu, Es. see

Advertising
background image



























75

Configure IP port

Available only on MC5-IP models,
the IP port configuration menu
allows you to determine settings that
relate directly to the global (IP) user
aspects of the unit:

Unit Configuration
IP admin password, encryption
settings, etc.

Network Configuration

IP address, net mask, VNC port,
etc.

Modem Configuration

Baud rate, initialisation string,
etc
.

Reset Configuration

Completely resets the IP portion
of the MC5-IP unit.

Unit Configuration

This page provides access to
a selection of both basic and
fundamental settings for the MC5-IP.

Keyboard
Use the arrow buttons to match the
keyboard layout expected by the host
system.

Admin Pwd
Enter the password that will be used
to gain administrator access to the
MC5-IP. There can only be one admin
user and only that user is given access
to the configuration menus. The
admin password background will be red until a reasonably secure password has
been entered, although this is only advisory as any password or no password
may be entered.

Unit Name
The name entered here will be displayed on the local menus and the remote
VNC/browser windows.

Time and Date
Use the left and right arrow keys to select the correct time and date. The time
entry uses the 24 hour clock notation. The internal real time clock will continue
to run for roughly one week without power to the unit, after that it will be lost
and require resetting. Use the up and down arrow keys to move between each
of the sections within the time and date entries.

Encryption
Three options are available: Always on, prefer off, prefer on. The one to choose
depends on the specific details of your installation - see

Encryption settings

for

details. The use of encryption imposes a slight performance overhead of roughly 10%
but is highly secure against third party intrusion.

To get here

1 From a local or remote (not accessible from a global keyboard), log on as

the ‘admin’ user.

2 Press

(hotkeys can change).

3 Press to select ‘More menus’.
4 Select ‘Functions’.
5 Select ‘Configure IP port’.

LINDY MC5

Configuration

Unit Configuration

Network Configuration

Modem Configuration

Reset Configuration

Back

Enter-Select

-Up

-Down

Esc-Exit

LINDY MC5

Unit Config

Hardware

Rev 1

Firmware

1.0b7

Keyboard

UK

Admin Pwd

Unit Name

AV CATx

Time

11 : 14 : 44

Date

27 Apr 2006

Encryption

Prefer Off

Enter-Select

-Up

-Down

Esc-Exit

Space-Toggle

Advertising