Lindy MC5-IP - Manual (Page 8)















7
Installation
Mounting
The MC5 units offer two main mounting methods:
• Supplied four self-adhesive rubber feet
• Supplied rack brackets
Connections
Rack brackets
The two supplied brackets (plus four screws), allow
the MC5 unit to be secured within a standard 1U
rack slot.
Note: Both the MC5 and its power supply
generate heat when in operation and
will become warm to the touch. Do not
enclose them or place them in locations
where air cannot circulate to cool the
equipment. Do not operate the equipment
in ambient temperatures exceeding 40
degrees Centigrade. Do not place the
products in contact with equipment
whose surface temperature exceeds 40
degrees Centigrade.
HT