Lucent Technologies GuestWorks and DEFINITY Enterprise Communications Server 108596560 - Manual (Page 44)

GuestWorks and DEFINITY ECS Release 8
Hospitality Operations
555-230-723
Issue 6
December 1999
Hospitality Operations
40 Front Desk Operations
3. After hearing the second dial tone, enter the room number.
■
A confirmation tone indicates that the restriction was activated. An
intercept tone indicates that the room number already has a
restriction assigned, or you dialed an improper digit. If the request
fails, press
RELEASE or CANCEL and start over.
■
The call appearance lamp goes off.
■
The display goes blank.
■
The Position Available lamp goes on.
■
The console returns to the normal operating mode.
Cancel Controlled Restriction for One Person
To deactivate a controlled restriction for one room, perform the following:
1. Press the START button or an idle call appearance button.
■
You hear dial tone.
■ The call appearance lamp goes on.
■
The Position Available lamp goes off.
2. Enter the User-Controlled Restriction deactivation feature access code
_____ followed by the digit that represents the current restriction:
■
Press the 1 button for Outward/Toll Restriction.
■
Press the 2 button for Total Restriction.
■
Press the 3 button for Termination Restriction.
■
Press the 4 button for Station-to-Station/Toll Restriction.
3. After hearing the second dial toned, enter the room number. You hear one
of the following:
■
Confirmation tone if the restriction code was accepted.
■
Intercept tone if you entered an improper restriction code number.
Press the
CANCEL button and start over again.
4. Press the RELEASE button.
■
The call appearance lamp goes off.
■
The display goes blank.
■
The Position Available lamp goes on.
■
The console returns to the normal operating mode.