2 using battery – Lenovo 3000 Series User Manual

Page 22

Advertising
background image

Lenovo Notebook Computer User Guide

The battery might contain a little power when you use it for the first 
time. Operate the computer on the battery power until the battery is 
fully discharged. Then complete the following steps to activate the 
battery.   
Step 1.  Uninterruptedly charge the battery for a long time.   
Step 2.  Operate  the  computer  on  the  battery  power  until  the 
battery is fully discharged. 
Step 3.  Do  the  Step  1  and  2  for  another  two  times.  The  charging 
time  must  be  longer  in  the  second  and  third  time  to  ensure  the 
battery  reaches  the  maximum  capacity.  After  the  aforesaid  steps, 
you can use the battery normally.   

 

Hint: Charge more than 6 hours when the computer is off;   
charge more than 8 hours when the computer is on. 

  Note:  1.  Do  not  unplug  the  power  connection  during  the 

charging.   

2. Use and charge only the battery that comes with the 
computer. 

1.3.2    Using battery 

When your computer is not connected to an external power source, 
it  will  automatically  supply  power  for  your  computer.  The 
fully‐charged  battery  operates  for  about  3~5  hours  (based  on  the 
maximum of the Battery Mark test result). 
The actual operating time varies with different factors, such as LCD 
brightness,  system  power  management  property,  application, 
computer peripheral usage, and battery accumulative using time.   
You  can  plug  the  adaptor  into  a  DC  IN  Jack  to  charge  the  battery. 
The  state  of  the  battery  charging  will  display  through  the  battery 

22

Advertising