Lenovo 3000 Series User Manual

Page 47

Advertising
background image

Lenovo Notebook Computer User Guide

 

3.2.3.1    Quiet Boot 

This  option  allows  you  to  display  a  screen  logo  immediately  upon 
booting  up  while  the  system  checks  itself.  This  appears  before  the 
actual  operating  system  is  loaded.  If  the  setting  is  [Enabled],  then 
the system will show a screen logo when boots up; If the setting is 
[Disabled], then won’t show a screen logo when boots up.   
The default setting is [Enabled]. 

3.2.3.2    Power on Display 

This option allows you to set the Power on Display mode: 
If  set  to  [Auto‐Selected],  then  if  any  external  display  is  connected, 
the power on display will be in CRT mode only. Otherwise it will be 
in LCD mode only. 
If  set  to  [Simultaneous],  then  will  display  both  of  the  integrated 
LCD screen and CRT screen mode. 
The default setting is [Auto‐Selected] mode. 

3.2.3.3    Legacy USB Support 

Enables or disables legacy USB device support. 
The default setting is [Enabled] 

47

Advertising