6 set up low power protection – Lenovo 3000 Series User Manual

Page 34

Advertising
background image

Lenovo Notebook Computer User Guide

Switch to “wake up” the computer and restore the previous state. If 
you  enable  the  hibernation  facility,  when  the  computer  battery  is 
extremely  low,  the  computer  will  enter  hibernation  mode 
automatically by default setting. 
The  following  are  ways  you  can  set  your  computer  to  enter 
hibernation mode: “close the lid of portable computer”, “press the 
Power Switch
” or “press the computer sleep button”.   
To  enable  the  hibernation  facility,  Click  Start  ‐>  Control  Panel  ‐> 
Performance  and  Maintenance  ‐>  Power  Options  ‐>  Hibernate
choose “Enable Hibernation” and click “Apply”. 

 

Hint: If the PC card does not work properly after the system 
restoress from hibernation mode, remove and re‐install the 
card and restart the computer. 

 
To  quit  hibernation  mode,  press  the  Power  Switch.  Press  the 
keyboard key and touchpad can not quit the hibernation mode. 

2.1.6

Set up low power protection: 

  Note: If you do not save your data in time before the battery 

runs out, and you have no related protection setting for this 
issue, your data will be lost. So we suggest you to read the   
following instructions about setting up low power   
protection. 

When  the  battery  power  is  very  low,  the  computer  will  notify  you 
by sound. You should save all the data to the hard disk immediately 
and connect the AC adaptor to the computer.   
If  you  can  not  connect  the  adaptor  to  the  computer,  turn  off  the 
computer or let the computer enter hibernation mode. 

34

Advertising