Liebert EM - Manual (Page 32)

Getting Started With the Web Interface
26
5.4.4 Create or Change Port Names
The Port Names feature allows you to create a name to help identify a serial port. This name is dis-
played throughout the Web interface and in notifications sent by pager or e-mail.
To access the Port Names window, log in (see 5.1 - Open the Web Interface and Log In) and:
• Click on the Power tab at the top of the Web interface, as shown below.
• Click on the Port Names button on the left side of the window. The right side of the window has
text boxes for the two serial ports, Port 1 and Port 2, that correspond to the Serial 1 and Serial 2
ports on the back of the unit. For example, Port 1 corresponds to any serial device connected to
the Serial 1 port.
• Click in the appropriate text box and enter a name. The name cannot exceed 12 characters in
length. (To rename a port, select all characters and enter a new name.)
• To delete a name, select all characters and press the Delete key.
• Click on the Apply button to keep your changes. (Or click Reset to cancel the changes.)
• Click the Close button to exit the Port Names window and return to the Power Data window.
Port Names
button
Port names
Power tab