Updating (flashing) bios from a cd-rom or diskette, Recovering from a post/bios update failure, Updating – Lenovo THINKCENTRE 6019 User Manual

Page 500: Flashing), Bios, From, Cd-rom, Diskette, Recovering, Post/bios

Advertising
background image

Updating

(flashing)

BIOS

from

a

CD-ROM

or

diskette

This

section

describes

how

to

update

(flash)

the

BIOS

using

a

CD-ROM

or

diskette.

system

program

updates

are

available

at

http://www.lenovo.com/support

on

the

World

Wide

Web.

1.

To

update

(flash)

the

BIOS:

v

If

using

a

CD-ROM,

make

sure

the

computer

is

turned

on.

Insert

the

system

program

update

(flash)

CD-ROM

into

the

optical

drive.

The

update

begins.

v

If

using

a

diskette,

make

sure

the

computer

is

turned

off.

Insert

the

system

program

update

(flash)

diskette

and

turn

on

the

computer.

The

update

begins.

2.

When

you

are

prompted

to

select

a

language,

press

the

number

on

your

keyboard

that

corresponds

to

the

language

and

then

press

Enter

.

3.

When

prompted

to

change

the

serial

number,

press

Y

.

4.

Type

the

seven-character

serial

number

of

your

computer

and

then

press

Enter

.

5.

When

prompted

to

change

the

machine

type/model,

press

Y

.

6.

Type

the

seven-character

machine

type/model

of

your

computer

and

then

press

Enter

.

7.

Follow

the

instructions

on

the

screen

to

complete

the

update.

Recovering

from

a

POST/BIOS

update

failure

Attention:

If

an

interruption

occurs

during

a

POST/BIOS

update

(flash

update),

the

computer

might

not

restart

correctly.

If

this

occurs,

perform

the

following

procedure

(also

known

as

a

Boot-block

recovery).

Note:

If

your

computer

has

no

internal

diskette

drive,

an

optional

USB

diskette

drive

must

be

connected

to

use

the

BIOS

flash

diskette.

1.

Turn

the

computer

off

and

insert

the

special

recovery

BIOS

flash

diskette

in

the

diskette

drive.

2.

Turn

the

computer

on.

3.

The

recovery

session

takes

two

to

three

minutes.

During

this

time

you

will

hear

a

series

of

beeps.

After

the

update

session

completes,

the

series

of

beeps

ends

and

the

computer

automatically

turns

off.

There

is

no

video

during

the

recovery

session.

4.

Remove

the

special

recovery

BIOS

flash

diskette

from

the

diskette

drive.

494

Hardware

Maintenance

Manual

Advertising