Turning on auto clear, Using the embedded web server – Lexmark X500N User Manual

Page 116

Advertising
background image

Turning on Auto Clear

Auto Clear specifies whether the printer automatically returns to the Default Mode setting after the set amount of
time if no operation is done during that time. To turn on Auto Clear and set the time-out duration:

1

Make sure the printer is on and Ready appears.

2

From the control panel, press

.

3

Press

or

repeatedly until Admin Settings appears, and then press

.

4

Press

or

repeatedly until Auto Clear appears, and then press

.

5

Press

or

repeatedly until On appears, and then press

.

6

Press

or

repeatedly to choose the time duration, and then press

.

7

Press

to return to the Ready state.

Using the Embedded Web Server

If the printer is installed on a network, the Embedded Web Server can be used for the following functions:

Checking the status of the printer

Checking the status of the printer supplies

Setting up the scan directory

Setting up the fax Speed Dial list

Configuring network settings

Creating an Embedded Web Server administrator password

Printing reports

Restoring the factory default settings of the printer

Backing up Embedded Web Server settings

To access the Embedded Web Server:

1

Open a Web browser.

2

In the address bar, type the network printer or print server IP address, and then press Enter.

116

Advertising
This manual is related to the following products: