Setting the outgoing fax name and number, Setting the date – Lexmark X500N User Manual

Page 25

Advertising
background image

4

Connect a second telephone cord from the telephone to the computer modem.

5

Connect a third telephone cord from the computer modem to the EXT port

of the printer.

Setting the outgoing fax name and number

To have the designated fax name and fax number printed on outgoing faxes:

1

From the control panel, press

.

2

Press

or

repeatedly until Admin Settings appears, and then press

.

3

Press

or

repeatedly until User Settings appears, and then press

.

4

Press

or

repeatedly until User Fax # appears, and then press

.

5

Use the keypad to enter the fax number, and then press

.

6

Press

or

repeatedly until User Name appears, and then press

.

7

Use the keypad to type the user name, and then press

.

8

Press

to return to the Ready state.

Setting the date

You can set the date so that the correct date is printed on every fax you send. If there is a power failure, you may
have to reset the date. To set the date:

1

From the control panel, press

.

2

Press

or

repeatedly until Admin Settings appears, and then press

.

25

Advertising
This manual is related to the following products: