Missing: install fuser unit, Missing: install opc belt, Missing: install toner <x – Lexmark X500N User Manual
Page 96: Missing: install transfer roller, No memory: out of memory, No response, Opc belt life: replace opc belt, Opc exhausted: replace opc belt, Paper change: load tray<x> <paper type, Paper empty: load tray <x> <paper type
Missing: Install Fuser Unit
The fuser unit is missing. Install the fuser unit.
Missing: Install OPC Belt
The photodeveloper cartridge is missing or not installed correctly. Install or reseat the photodeveloper cartridge.
Missing: Install Toner <x>
The specified toner cartridge is missing. Install the specified toner cartridge.
Missing: Install Transfer Roller
The transfer roller is missing or not installed correctly. Install or reseat the transfer roller.
No Memory: Out of Memory
There is insufficient memory to complete the current print job. Cancel the job, and then try sending it again.
No Response
A signal from the destination fax machine was not received. The fax number will be redialed.
OPC Belt Life: Replace OPC Belt
1
Replace the photodeveloper cartridge.
2
From the Machine Settings menu, reset the photodeveloper cartridge (OPC Belt) counter.
OPC Exhausted: Replace OPC Belt
1
Replace the photodeveloper cartridge.
2
From the Machine Settings menu, reset the photodeveloper cartridge (OPC Belt) counter.
Paper Change: Load Tray<x> <paper type>
The printer is set to print on a paper type that is different from what is loaded in Tray 1. Load Tray 1 with the correct
paper type, or change the paper type settings in the Machine Settings menu or Print Properties to match what is
loaded in Tray 1.
Paper Empty: Load Tray <x> <paper type>
The specified paper tray is empty, or an incorrect paper type is loaded. Load the specified tray with the specified
paper type.
Paper Error: Load Tray 1 <paper type>
The printer is set to print on a paper type that is different from what is loaded in Tray 1. Load Tray 1 with the correct
paper type, or change the paper type settings in the Machine Settings menu to match what is loaded in Tray 1.
Paper Jam A1/Paper Jam A2/Paper Jam B/Paper Jam C
Clear the paper path to resume printing.
PC Printing
Wait for the message to clear.
PF<x> Kit Life: Replace PF Kit <x>
The paper feed roller and separator pad in Tray <x> are near exhaustion. Replace the paper feed roller and separator
pad for the specified tray.
96