Lexmark X500N - Manual (Page 98)

Set Correct Paper
Not all paper sizes are supported for faxing. An unsupported paper size is loaded in the tray. Load a supported paper
size.
Sleep
The printer is saving power while it waits for the next print job.
TAD Answering
An answering machine has answered the call. Wait for the message to clear.
Toner Error: Install Supported Toner Cartridge
An invalid toner cartridge is installed. Remove the toner cartridge, and then install a supported one.
Transmitting
The printer has connected with the receiving fax machine and is sending a fax. Wait for the message to clear.
Toner Low <xxxx>
The toner cartridge(s) of color “x”—K (black), M (magenta),Y (yellow), or C (cyan)—will soon be exhausted. The
specified toner cartridge can print approximately 100–125 pages, depending on the coverage of the toner color, after
this message first appears.
When Toner Low <xxxx> appears or when the print becomes faded, follow these steps to extend the life of the
toner cartridge(s):
1 Remove the toner cartridge(s).
2 Firmly shake the cartridge(s) side-to-side and front-to-back several times to redistribute toner.
3 Reinsert the toner cartridge(s) and continue printing.
Note: Repeat this procedure multiple times until the print remains faded, and then replace the toner cartridge(s).
Tray <x> Missing: Insert Tray
Tray 1 and/or Tray 2 is missing. Insert the specified tray(s) into the printer.
TR Belt Life: Replace Transfer Belt
The transfer belt is exhausted. Install a new transfer belt.
TR Kit Life: Replace PQ Kit
The transfer roller and transfer belt cleaning roller are exhausted. Install a new transfer roller and a new transfer belt
cleaning roller.
TX Comm Error
An outgoing fax transmission error has occurred. Resend the fax.
Warming up
Wait for the message to clear.
Waste Pack Full
The waste toner bottle is full or missing. If it is full, replace it using the instruction sheet that came with the replacement
waste toner bottle. If it is missing, install it.
98