Lenovo 3379 - Manual (Page 25)

To install or replace a memory module:
1.
Open the computer cover. See “Opening the computer cover” on page 14.
2. Pivot the optical drive bay assembly upward to access the memory slots. See
“Accessing the system board components and drives” on page 16.
3. Remove any parts that might prevent your access to the memory slots.
4. Locate the memory slots.
5. Open the retaining clips.
If you are replacing an old memory module, open the retaining clips and
remove the memory module being replaced as shown.
Figure 7. Opening the retaining clips
Figure 8. Removing the old memory module
Chapter 2. Installing options and replacing hardware 17