Obtaining device drivers, Installing security features – Lenovo 3379 User Manual
Page 45
2.
Ensure that the cables are routed correctly before lowering the optical drive bay
assembly.
Important
Correctly route all power supply cables to avoid interference with the
drive bay assembly. Keep cables clear of the hinges and sides of the
computer chassis.
3.
Lower the optical drive bay assembly.
4.
Close the computer cover.
5.
If a computer cover lock is installed, lock the computer cover.
6.
Reconnect the external cables and power cords to the computer. See “Locating
connectors on the rear of your computer” on page 8.
7.
To update your configuration, see Chapter 4, “Using the Setup Utility,” on page
49.
Note:
In most areas of the world, Lenovo requires the return of the defective
Customer Replaceable Unit (CRU). Information about this will come with
the CRU or will come a few days after the CRU arrives.
Obtaining device drivers
You can obtain device drivers for operating systems that are not preinstalled at:
http://www.lenovo.com/support
Installation instructions are provided in readme files with the device-driver files.
Installing security features
To help prevent hardware theft and unauthorized access to your computer, several
security options are available. In addition to physical locks, unauthorized use of
your computer can be prevented by a software lock that locks the keyboard until a
correct password is typed in.
Figure 30. Cable routing
Chapter 2. Installing options and replacing hardware
37